We – EPG Group the most significant gearbox & motors , torque limiter couplings and gears factory in China with 5 various branches. For much more details: Cellular/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828
one. Mixers:
one.1 Automated Container Mixer
Automatic container mixer is wor ept with steady content trolleys, the container fills the materials and lifted up and connnected tightly with mixing head immediately. The mixing head tilts with each other with the containers, and then receive the homogeneous mixing end result, following finishing mixing as for each location time, and return to original situation, the whole process will be managed by PLC
Main Features:
Several removable containers for circular procedure
High effectiveness
Adopting PLC to recognize automation
Homogenized mixture
No curing granule
Convenient for cleaning and upkeep
Protected and relaiable operation
Technical Knowledge:
Design | Quantity (L) | Output (kg/tank) | Mixing Motor (kw) | Tilting Motor (kw) | Crushing Motor (kw) | Mixing Time (min) | Manage Method | General Dimensions (MM) |
FHJ-fifteen | fifteen | eight | one.5 | five-ten | PLC | 750*480*950 | ||
FHJ-a hundred and twenty | 120 | sixty | 5.five | .2 | five-10 | PLC | 1800*1800*1950 | |
FHJ-150 | a hundred and fifty | 70 | 5.five | .37 | two.2 | 5-10 | PLC | 2150*1100*2300 |
FHJ-300 | 300 | a hundred and fifty | 15 | three | two.two | five-ten | PLC | 2150*1100*2300 |
FHJ-600 | 600 | three hundred | 22 | 4 | four | five-10 | PLC | 2650*1250*2700 |
FHJ-a thousand | a thousand | five hundred | thirty | four | four | 5-10 | PLC | 2900*1550*3100 |
FHJ-2000 | 2000 | a thousand | forty five | five.5 | 5.five | five-10 | PLC | 3500*2350*3650 |
one.2 Large Speed Pre-Mixer:
Characteristics:
High effectiveness & easy operation
Simple coloration altering, protected cleaning
Merged mixing & crushing as 1
Mixing time preseting, quick & homogeneous
Exceptional sealing, powder lea ept free
Vertical or horizontal type as optional
Complex Knowledge:
Model | Volume (L) | Mixing Motor (kw) | Crushing Motor (kw) | Mixing Time (min) | Total Proportions (mm) |
GHJ-twenty | 20 | .fifty five | .37 | three-5 | 700*500*800 |
GHJ-one hundred | 100 | three | 1.five | 3-five | 1000*600*900 |
GHJ-200 | 200 | 5.five | 3 | three-five | 1500*900*1400 |
GHJ-300 | 300 | seven.5 | 4 | 3-6 | 1800*900*1400 |
GHJ-500 | five hundred | 15 | 5.5 | 4-6 | 1800*1300*1800 |
GHJ-800 | 800 | 18.5 | seven.five | four-6 | 1900*1300*2000 |
GHJ-1000 | one thousand | 22 | 7.5 | 4-6 | 2300*1400*2000 |
one.3 Double Cone Mixer:
This twin-cone mixer is composed of a rotating container with two cones and two stirrers. This machine is applicable for powder coating, pharmaceutical, chemical, foodstuff, dyestuff, and other multi-compound supplies. It has impressive result in mixing powders and particles with comparatively very good fluidity. Its barrel is created of stainless steel, which is polished both inside of and exterior, showcasing beautiful look and simple operation.
Technological Knowledge:
Design | Quantity (L) | Output (kg/tank) | Rotating Motor (kw) | Mixing Motor (kw) | Mixing Time (min) | Total Dimensions (mm) |
SXH-a hundred | 300 | a hundred and fifty | one.5 | one.five | -thirty | 1760*830*2030 |
SXH-two hundred | 400 | 200 | one.5 | 1.five | -30 | 1830*830*2150 |
SXH-three hundred | 600 | three hundred | two.two | 1.five | -30 | 1980*a thousand*2275 |
SXH-five hundred | one thousand | 500 | 4 | 4 | one-thirty | 2630*1140*2620 |
SXH-1000 | 2000 | 1000 | five.5 | 5.five | -30 | 3060*1440*2860 |
SXH-1500 | 3000 | 1500 | 7.5 | 7.5 | -30 | 3700*2000*2970 |
SXH-2000 | 4000 | 2000 | eight.5 | 8.5 | -30 | 3800*2500*3500 |
2. Twin-Screw Extruder
two.1 High torque & High Velocity Rotation Twin-Screw Extruder:
Principal Attributes:
*Entire Gearbox from expert EPT maker, lower sounds, sturdy longevity
*Large screw velocity, higher shearing, quick discharge
*Independent lube oil cooling technique design and style
*Torque limiter to defend the travel teach
*Suitable for reclaim powder, special powder generation
*Split design of barrel and liner inserts for easy cleaning and maintainence
*Prime & Side feeding alternatives
*Other functions identical as standard kind extruder
Specialized Parameters:
Design | Potential (kg/h) | Screw Diameter (mm) | Screw Size (mm) | Screw Speed (r/min) | Major Motor (kw) | Feeder Motor (kw) | Heating Energy (kw) | All round Dimensions (mm) |
TSX-forty | 80-260 | forty | 16D | -800 | 11/15/18.5 | .fifty five | eight | 1850*700*1750 |
TSX-52 | 150-450 | fifty two | 16D | -800 | 22/thirty/37 | .seventy five | ten | 2700*900*2200 |
TSX-sixty five | 400-1000 | 65 | 16D | -800 | forty five/55/75 | 1.one | twelve | 2900*a thousand*2400 |
TSX-75 | 800-1200 | seventy five | 16D | -800 | seventy five/90 | one.five | sixteen | 3100*1200*2500 |
TSX-85 | 1200-1800 | 85 | 16D | -800 | ninety/one hundred ten | two.2 | twenty | 3700*1500*2900 |
two.2 Conventional Kind Co-Rotation Parallel Twin Screw Extruder
Features:
*Powerful shearing, simple cleansing
*Exact car temperature manage, substantial cooling & heating exchagne
*Hinged clamshell kind barrel opening, segmented liners for simple changing and cost conserving
*Feeder straightforward assembly & disassembly, inner composition to stay away from agglomeration
*Configurable screw applied for defferent powder formulas
*Screw and barrel undertake unique resources like Cr12MoV, CPM, and so on., high wearing resisting
*Fairly gearbox with lower sound dB level
*Torque limiter to defend the generate train
*Lower strength intake
Specialized Parameters:
Model | Capacity (kg/h) | Screw Diameter (mm) | Screw Size | Screw Speed (r/min) | Major Motor (kw) | Feeder Motor (kw) | Heating Electrical power (kw) | All round Dimensions (mm) |
SLJ-forty | eighty-220 | forty | 16D | -500 | eleven/15/18.five | .fifty five | 4 | 1800*600*1700 |
SLJ-fifty | a hundred and fifty-three hundred | 50 | 16D | -five hundred | 22/30 | .75 | eight | 2600*seven-hundred*2000 |
SLJ-55 | 300-400 | fifty five | 16D | -five hundred | 30/37 | .75 | eight | 2700*900*2300 |
SLJ-60 | four hundred-600 | 60 | 16D | -500 | 45 | 1.1 | twelve | 2750*one thousand*2350 |
SLJ-seventy five | 600-800 | seventy five | 16D | -five hundred | fifty five | 1.five | twelve | 2900*1100*2400 |
SLJ-80 | 800-1200 | 80 | 16D | -five hundred | 75/ninety | two.two | twenty | 3700*800*2800 |
two.3 Lab Kind Extruder
Specialized Parameters:
Design | Capacity (kg/h) | Screw Diameter (mm) | Screw Size | Screw Speed (r/min) | Primary Motor (kw) | Feeder Motor (kw) | Heating Power (kw) | General Dimensions (mm) |
TSX-twenty | .2-ten | 22 | 16D | -600 | two.2-4 | .one | two | 1600*300*850 |
SLJ-30 | one-30 | 30 | 16D | -500 | three-5.five | .18 | 3.two | 1430*550*1300 |
SLJ-32 | 40-80 | 32 | 16D | -500 | 7.5/eleven | .25 | three.two | 1600*500*1500 |
3 Cooling Belt
three.1 H2o Cooled Cooling Belt with Flaker:
Features:
Steady quality imported steel belt
Bottom cooling h2o spraying system, installed heating and cooling gadget
Geared up with guide system to keep away from deforming
Greater cooling end result, larger efficient productiveness
Number of routine maintenance and straightforward cleaningSlip can also happen in the reverse course, so that the input associates would slip to avoid the torque overload from transmitting to the output ingredient.
Chips thickness and roller velocity adjustable
Crusher with finger pin and teeth type
Minimized cross contamination, basic operation
Complex Parameters:
Product | Roller Dia. (mm) | Belt Width (mm) | Belt Length (mm) | Drive Motor (kw) | Capability (kg/h) | Cooling Mode | Total Dimensions (mm) |
GDY-406 | 220 | 600 | 4000 | 1.five | two hundred-four hundred | Cooled H2o | 4000*750*1600 |
GDY-508 | 325 | 800 | 5000 | three | 400-five hundred | Cooled H2o | 5000*900*1800 |
GDY-510 | 325 | 1000 | 5000 | three | 500-seven hundred | Cooled H2o | 5000*1100*1900 |
GDY-610 | 440 | a thousand | 6000 | four | 600-800 | Cooled H2o | 6000*1100*1900 |
GDY-612 | 440 | 1200 | 6000 | 4 | seven hundred-900 | Cooled Water | 6000*1400*1900 |
GDY-712 | 600 | a thousand | 7000 | five.5 | 900-1200 | Cooled Drinking water | 7000*1400*2000 |
3.2 Air Cooled Type Caterpillar Cooling Belt with Flaker:
Attributes:
Stainless metal manufactured caterpillar, air cooling
Flake chips thichness and conveying velocity adjustable
Realistic design for cooling rollers within, skilled area remedy to stay away from h2o lea ept and rust
Set up with simplified air conditioning device
Risk-free procedure, like crisis button, clockwise and counter-clockwise rotation.
Technological Parameters:
Model | Roller Dia. (mm) | Belt Width (mm) | Belt Size (mm) | Drive Motor (kw) | Blower Motor (kw) | Capability (kg/h) | Cooling Manner | Overall Proportions (mm) |
JFY-204 | 160/a hundred and sixty | 400 | 2000 | .fifty five | 200-400 | 30-a hundred | Chilled H2o&Air | 2000*450*900 |
JFY-406 | one hundred sixty/220 | 600 | 4000 | .75 | four hundred-500 | one hundred-220 | Chilled H2o&Air | 4000*850*950 |
JFY-508 | 180/325 | 700 | 5000 | .seventy five | 500-700 | 220-four hundred | Chilled Drinking water&Air | 5000*1050*1200 |
JFY-510 | 180/325 | 800 | 5000 | one.one | 600-800 | four hundred-500 | Chilled H2o&Air | 5000*1150*1200 |
JFY-610 | one hundred eighty/325 | 800 | 6000 | 1.1 | 700-900 | five hundred-seven-hundred | Chilled Drinking water&Air | 6000*1150*1200 |
JFY-710 | one hundred eighty/325 | 1000 | 6000 | one.five | 900-1200 | 600-900 | Chilled Water&Air | 7000*1250*1450 |
JFY-812 | a hundred and eighty/325 | 1000 | 7000 | two.2 | 900-1200 | 900-1200 | Chilled H2o&Air | 8000*1650*1600 |
3.3 PU Type Air Cooled Cooling Belt
Characteristics:
Adjustable thichness and roller velocity
Air cooled to steer clear of cross contamination
Roller and crusher outfitted with overload security
High efficiencies
One piece PU belt to faciliate effortless cleaning and routine maintenance
Compact layout for limited area
Specialized Parameters:
Model | Roll Dia. (mm) | Band Width (mm) | Band Length (mm) | Motor Energy (kw) | Throughput (kg/h) | Dimensions (mm) |
PFY-104 | 156 | 400 | one thousand | one.1 | fifty | one thousand*870*1050 |
PFY-206 | 220 | 600 | 2000 | one.one | a hundred and fifty | 2000*1150*1100 |
PFY-208 | 445 | 800 | 2000 | two.two | three hundred | 2000*1100*1100 |
PFY-210 | 445 | one thousand | 2000 | two.2 | five hundred | 2000*1300*1100 |
PFY-310 | 622 | a thousand | 3000 | 2.two | 800 | 2000*1300*1200 |
4 ACM (Air Classifier Mill) Grinding Method
Features:
Protection in accordance with EU explosion resistant normal ATEX/PSR11
Minimal sound layout (from mill to enthusiast system)
Particle measurement distribution adjustable on request
Mill body temperature and air intake volume monitoring
Rotary sieve with distinctive layout and sturdy for mesh put on issue
Whole grinding method designed for powder dust free
Concluded powder products with much more than 98 %
Large output, easy procedure cleansing and upkeep
Specialized Parameters:
Design | Mill Motor kw | Rotor rpm | Classifier Motor | Classifier rpm | Enthusiast kw | Air cbm/h | Potential kg/h | Total proportions mm |
ACM-02 | two.two | 12000 | .37 | -3000 | three | 350 | 2-30 | 1430*550*1300 |
ACM-05 | four | 11000 | .75 | -3000 | 4 | 800 | thirty-80 | 2100*one thousand*2150 |
ACM-10 | seven.five | 7000 | 1.5 | -3000 | eleven | 2500 | a hundred-260 | 6200*1250*3200 |
ACM-fifteen | 11 | 7000 | 1.five | -3000 | fifteen | 3000 | 200-350 | 6500*1300*3300 |
ACM-20 | fifteen | 6600 | two.two | -3000 | 22 | 3500 | three hundred-four hundred | 7500*1300*3600 |
ACM-thirty | 22 | 5500 | 3 | -3000 | 30 | 4500 | 400-550 | 7900*1500*3600 |
ACM-forty | thirty | 4600 | 5.5 | -3000 | 37 | 5500 | 600-800 | 8000*1700*3600 |
ACM-50 | 37 | 4000 | seven.5 | -3000 | 45 | 6500 | one thousand-1200 | 9000*1900*3900 |
ACM-sixty | forty five | 3500 | seven.five | -3000 | 55 | 8000 | 1200-1600 | 9000*2000*4000 |
Firm:
Xihu (West Lake) Dis.sun is a leading producer in China of Powder Coating Manufacturing Equipments, i.e. Mixers, Extruders, Cooling Belt and Air Classifier Mill. We inherit 30 several years of experiences in this ept and have exported to virtually 30 nations around the world and locations in the past ten years, and acquire extensively great reputations.
We passed CE certification acceptance and ATEX explosion resistant check, and so on. global requirements, we do know how to meet the diversified and tailored made requests of our customers.
Our everlasting business philosophy: consistant high quality, effective communication, responsible support.
The use of unique products manufacturer’s (OEM) part figures or emblems , e.g. CASE® and John Deere® are for reference functions only and for indicating item use and compatibility. Our organization and the listed alternative elements contained herein are not sponsored, approved, or produced by the OEM.