China Feetech 24V 45kg 360 Degree Full Metal Gear Brushless Motor Humanoid Robot Servo SM45BL For Robotic Arm Electric Gripper with Hot selling

Model Number: SM45BL
Servo Type: Standard Robot Servo motor
Servo Torque: 45kg Torque Servo Motor
Servo Angle: 360 Degree Large Angle Standard Servo
Servo Gear: Steel Gear Metal Servo Motor
Servo Motor: Brushless Motor RC Servo
Servo Voltage: 24V High Voltage Servo Motor
Servo Speed: 0.1s High precision and high speed servo
Servo Function: Double Mode Working Servomotor
Servo Features: Artificial intelligence automatic execution module
Servo Application: Servo For Industry Equipment Robotic Arm
Packaging Details: Gift box with 1 bag of accessory
Port: HangZhou

If you need to debug software and information after purchase, please contact the seller. 24V 45kg 360° Brushless Motor Robot Servo SM45BL For Xihu (West Lake) Dis.noid Robotic Arm Electric GripperFeatures: *Metal Gear Brushless Servo: Equipped with strong Stainless Steel Gears, CNC aluminium Shell, Less Noise, light weight. *Real-time feedback of position, temperature, voltage. The top of the servo has a warning light, and the indicator will blinkwhen overcurrent, over temperature or locked-rotor occurs *The stall torque is 45kg.cm,can achieve 0-360 degrees any angle controllable. *Multi-turn continuous operation mode *Realize the function of setting the middle point with 1 key *Can feedback position, speed, current, voltage, temperature, load parameters, intelligent protection *Suitable for application in industrial equipment, Custom ABS PC Plastic Injection Parts Hot Runner Plastic Injection CZPT Maker robot and other industries. Products Description Weight: 100gSize: 46.5*28.5*34mmMotor: Brushless motorGear type: Steel Gear (Gear Ratio 353:1 )Bearing: 2 Ball bearingsHorn gear spline: 25T (OD5.96mm)Connector wire: 40cm with 5264-4P connectorAngle Sensor: 12Bits Magnetic CodingServo Angle: 360°(when 0~4096)-ClockwiseElectronic parameter:Operating Voltage Range: 24VNo load speed: 0.142sec/ 60degree 70RPMRunning current(at no load) : 160 mA@24VPeak stall torque: 45kg.cm@24VRated torque: 15kg.cm@24VStall current: 2300mA@24VRated Load:15kg. cm≤Rated current:900mm≤KM:19kg. cm/ATerminal resistance: 7ΩCommand signal: Bus Packet Communication RS485Protocol Type: Half duplex Asynchronous Serial Communication IDID range: 0-253Communication Speed: 38400bps ~ 1 MbpsFeedback: Position,Speed,Voltage,Load,TemperaturePosition Sensor Resolution: 12Bits Magnetic Coding(360° /4096)

24V 45kg RS485 serial bus servo
Storage Temperature Range-30℃~80℃
Operating Temperature Range-20℃~80℃
Command signalBus Packet Communication RS485
Protocol TypeHalf duplex Asynchronous Serial Communication
ID range0-253
Communication Speed38400bps ~ 1 Mbps
Details Images Our Company HangZhou FEETECH RC Model Co., Ltd was established in 2011.We are a servo manufacturing factory and can give you customized products and solutions.Our quality assurance system has been certified by I S O 9001: 2015, while all our products have been certified by CE, RoHS .Our products can be used in various industries:Here are some of applications of our servos: RC model, education robot, desktop robot and service robot;Logistics system: shuttle car, sorting line, For iPhone 12 12 Pro Max Back Glass Separating Laser Machine Positioning Automatic Alignment Mold smart warehouse; Smart home: smart lock, switch controller.If you have custom requirements please contact the seller. Contact Us Choose our,you can:1.Your Logo label or print2.Servo Wire:length,wire core,wire color.3.Packing:PE Bag,Color Box,plastic box with your Logo4.Cable connector:1-4 pin JR,JST, XH5.Output Gear:The material:Plastic,Copper,steel,aluminium.Output teeth:25 T Spline,hexagonal,and so on6.CNC case:Case structure,color7.Electronic function More…… Our Services & Strength Specialized in ODM and OEM and Custom Made we can provide electronic design, China Mold Factory Custom Design Die Casting Tooling Parts Double for HouseholdElectronic Products Plastic Injection CZPT structure design and production of 0 one-stopcustomized service, Please feel free to share with me your idea.If the servo does not match your requirements , please do not hesitate to contact with us, we have hundreds of servos for optional, and we are professional servo manufacturer since 2011, customizing servo as per requirements is our advantage. FAQ 1. How can I know the product is suitable for me? First, you need to provide us the more details information about the product. We will recommend the item to you according to your requirement of specification. After you confirm, we will prepare the samples to you. also we will offer some good advances according to your product use.2.The price you are offering is with shipping costs included?The price does not include the shipping cost.We offer several shipping solutions,make sure customers choose the most economical one.3. Can I come to your company to visit? YES, you can come to our company to visit at anytime, and welcome to visit our company.4.what can you buy from us ?We are specialized in servos,manufacturing various kinds of servos:programmable servo, robotic servo, digital servo,analog servo,485 S-bus intellegent servo etc.5. How do contact us ? Please send an inquiry .Quality Control:To guarantee our quality, our QC will inspect the goods from the following steps:1. Raw materials, 20Nm 30Nm 50Nm 100Nm 200Nm Mechanical arm load measurement torsion meter, rotation torque, torque detection static torque sensor to control the quality from the source.2. Semi-finished products.3. Before package, our QC will inspect the 100% goods .

The Parts of a Gearbox

There are many parts of a Gearbox, and this article will help you understand its functions and components. Learn about its maintenance and proper care, and you’ll be on your way to repairing your car. The complexity of a Gearbox also makes it easy to make mistakes. Learn about its functions and components so that you’ll be able to make the best choices possible. Read on to learn more. Then, get your car ready for winter!
gearbox

Components

Gearboxes are fully integrated mechanical components that consist of a series of gears. They also contain shafts, bearings, and a flange to mount a motor. The terms gearhead and gearbox are not often used interchangeably in the motion industry, but they are often synonymous. Gearheads are open gearing assemblies that are installed in a machine frame. Some newer designs, such as battery-powered mobile units, require tighter integration.
The power losses in a gearbox can be divided into no-load and load-dependent losses. The no-load losses originate in the gear pair and the bearings and are proportional to the ratio of shaft speed and torque. The latter is a function of the coefficient of friction and speed. The no-load losses are the most serious, since they represent the largest proportion of the total loss. This is because they increase with speed.
Temperature measurement is another important preventive maintenance practice. The heat generated by the gearbox can damage components. High-temperature oil degrades quickly at high temperatures, which is why the sump oil temperature should be monitored periodically. The maximum temperature for R&O mineral oils is 93degC. However, if the sump oil temperature is more than 200degF, it can cause seal damage, gear and bearing wear, and premature failure of the gearbox.
Regardless of its size, the gearbox is a crucial part of a car’s drivetrain. Whether the car is a sports car, a luxury car, or a farm tractor, the gearbox is an essential component of the vehicle. There are two main types of gearbox: standard and precision. Each has its own advantages and disadvantages. The most important consideration when selecting a gearbox is the torque output.
The main shaft and the clutch shaft are the two major components of a gearbox. The main shaft runs at engine speed and the countershaft may be at a lower speed. In addition to the main shaft, the clutch shaft has a bearing. The gear ratio determines the amount of torque that can be transferred between the countershaft and the main shaft. The drive shaft also has another name: the propeller shaft.
The gears, shafts, and hub/shaft connection are designed according to endurance design standards. Depending on the application, each component must be able to withstand the normal stresses that the system will experience. Oftentimes, the minimum speed range is ten to twenty m/s. However, this range can differ between different transmissions. Generally, the gears and shafts in a gearbox should have an endurance limit that is less than that limit.
The bearings in a gearbox are considered wear parts. While they should be replaced when they wear down, they can be kept in service much longer than their intended L10 life. Using predictive maintenance, manufacturers can determine when to replace the bearing before it damages the gears and other components. For a gearbox to function properly, it must have all the components listed above. And the clutch, which enables the transmission of torque, is considered the most important component.
gearbox

Functions

A gearbox is a fully integrated mechanical component that consists of mating gears. It is enclosed in a housing that houses the shafts, bearings, and flange for motor mounting. The purpose of a gearbox is to increase torque and change the speed of an engine by connecting the two rotating shafts together. A gearbox is generally made up of multiple gears that are linked together using couplings, belts, chains, or hollow shaft connections. When power and torque are held constant, speed and torque are inversely proportional. The speed of a gearbox is determined by the ratio of the gears that are engaged to transmit power.
The gear ratios in a gearbox are the number of steps a motor can take to convert torque into horsepower. The amount of torque required at the wheels depends on the operating conditions. A vehicle needs more torque than its peak torque when it is moving from a standstill. Therefore, the first gear ratio is used to increase torque and move the vehicle forward. To move up a gradient, more torque is required. To maintain momentum, the intermediate gear ratio is used.
As metal-to-metal contact is a common cause of gearbox failure, it is essential to monitor the condition of these components closely. The main focus of the proactive series of tests is abnormal wear and contamination, while the preventative tests focus on oil condition and additive depletion. The AN and ferrous density tests are exceptions to this rule, but they are used more for detecting abnormal additive depletion. In addition, lubrication is critical to the efficiency of gearboxes.
gearbox

Maintenance

Daily maintenance is a critical aspect of the life cycle of a gearbox. During maintenance, you must inspect all gearbox connection parts. Any loose or damaged connection part should be tightened immediately. Oil can be tested using an infrared thermometer and particle counters, spectrometric analysis, or ferrography. You should check for excessive wear and tear, cracks, and oil leaks. If any of these components fail, you should replace them as soon as possible.
Proper analysis of failure patterns is a necessary part of any preventative maintenance program. This analysis will help identify the root cause of gearbox failures, as well as plan for future preventative maintenance. By properly planning preventative maintenance, you can avoid the expense and inconvenience of repairing or replacing a gearbox prematurely. You can even outsource gearbox maintenance to a company whose experts are knowledgeable in this field. The results of the analysis will help you create a more effective preventative maintenance program.
It is important to check the condition of the gearbox oil periodically. The oil should be changed according to its temperature and the hours of operation. The temperature is a significant determinant of the frequency of oil changes. Higher temperatures require more frequent changes, and the level of protection from moisture and water reduces by 75%. At elevated temperatures, the oil’s molecular structure breaks down more quickly, inhibiting the formation of a protective film.
Fortunately, the gear industry has developed innovative technologies and services that can help plant operators reduce their downtime and ensure optimal performance from their industrial gears. Here are 10 steps to ensure that your gearbox continues to serve its purpose. When you are preparing for maintenance, always keep in mind the following tips:
Regular vibration analysis is a vital part of gearbox maintenance. Increased vibration signals impending problems. Visually inspect the internal gears for signs of spiraling and pitting. You can use engineers’ blue to check the contact pattern of gear teeth. If there is a misalignment, bearings or housings are worn and need replacement. Also make sure the breathers remain clean. In dirty applications, this is more difficult to do.
Proper lubrication is another key factor in the life of gearboxes. Proper lubrication prevents failure. The oil must be free of foreign materials and have the proper amount of flow. Proper lubricant selection depends on the type of gear, reduction ratio, and input power. In addition to oil level, the lubricant must be regulated for the size and shape of gears. If not, the lubricant should be changed.
Lack of proper lubrication reduces the strength of other gears. Improper maintenance reduces the life of the transmission. Whether the transmission is overloaded or undersized, excessive vibration can damage the gear. If it is not properly lubricated, it can be damaged beyond repair. Then, the need for replacement gears may arise. However, it is not a time to waste a lot of money and time on repairs.

China Feetech 24V 45kg 360 Degree Full Metal Gear Brushless Motor Humanoid Robot Servo SM45BL For Robotic Arm Electric Gripper     with Hot selling		China Feetech 24V 45kg 360 Degree Full Metal Gear Brushless Motor Humanoid Robot Servo SM45BL For Robotic Arm Electric Gripper     with Hot selling
editor by czh2023-02-16